Predefined user roles
network-admin
Parameters
username: Specifies a username. You can use the display ftp-user command to display FTP user
information.
Examples
# Manually release the FTP connection that was established by using the user account named ftpuser.
<Sysname> free ftp user ftpuser
Are you sure to free FTP connection? [Y/N]:y
<Sysname>
free ftp user-ip
Use free ftp user-ip to manually release the FTP connection that was established from a specific IPv4
address.
Syntax
free ftp user-ip ipv4-address [ port port ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the source IP address of an FTP connection to be released. You can use the
display ftp-user command to view the source IP address of the FTP connection.
port port: Specifies the source port of an FTP connection to be released. You can use the display ftp-user
command to view the source port of the FTP connection.
Examples
# Manually release the FTP connection that was established from IP address 192.168.20.184.
<Sysname> free ftp user-ip 192.168.20.184
Are you sure to free FTP connection? [Y/N]:y
<Sysname>
free ftp user-ip ipv6
Use free ftp user-ip ipv6 to manually release the FTP connection that was established from a specific IPv6
address.
Syntax
free ftp user-ip ipv6 ipv6-address [ port port ]
Views
User view
67