Rule - HP FlexFabric 7900 Series Command Reference Manual

Parameters
name feature-group-name: Specifies a feature group name. The feature-group-name argument is a
case-sensitive string of 1 to 31 characters.
Usage guidelines
The L2 feature group includes all Layer 2 feature commands, and the L3 feature group includes all
Layer 3 feature commands. These predefined feature groups are not user configurable.
In addition to the predefined feature groups L2 and L3, you can create a maximum of 64 user role
feature groups.
After you create a user role feature group, you can use the display role feature command to display
the features available in the system. Then you can use the feature command to add features to the
feature group.
Examples
# Create a feature group named security-features.
<Sysname> system-view
[Sysname] role feature-group name security-features
[Sysname-featuregrp-security-features]
Related commands
display role feature-group
display role feature
feature

rule

Use rule to create or change a user role rule for controlling access to commands, XML elements, or
MIB nodes.
Use undo rule to delete a user role rule.
Syntax
rule number { deny | permit } { command command-string | { execute | read | write } * { feature
[ feature-name ] | feature-group feature-group-name | oid oid-string | xml-element [ xml-string ] } }
undo rule { number | all }
Default
A user-defined user role does not have any rules and cannot use any command, XML element, or
MIB node.
Views
User role view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies a rule number in the range of 1 to 256.
deny: Denies access to any specified command, XML element, or MIB node.
permit: Permits access to any specified command, XML element, or MIB node.
64