Issu Commands; Display Install Active - HP FlexFabric 7900 Series Command Reference Manual

ISSU commands

You can use ISSU to upgrade startup software images only for two-chassis IRF fabrics. When the
master reboots for an upgrade, the subordinate member takes over to ensure service continuity.
The HPE 7904/HPE 7904 TAA switch uses one built-in MPU (slot 0) and the HPE 7910/HPE 7910
TAA switch uses two removable switching fabric modules (slots 10 and 11) for switching and control.
Unless otherwise stated, the term "card" collectively refers to LPUs, switching fabric modules, and
MPUs. The term "MPU" collectively refers to the switching fabric modules on the HPE 7910/HPE
7910 TAA switch and the built-in MPU on the HPE 7904/HPE 7904 TAA switch.

display install active

Use display install active to display active software images.
Syntax
display install active [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for all cards.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
only the names of the active software images.
Examples
# Display detailed information about active software images.
<Sysname> display install active verbose
Active packages on chassis 1 slot 11:
flash:/boot.bin
[Package]
Vendor: HPE
Product: xxxx
Service name: boot
Platform version: 7.1.022
Product version: Test 2201
Patch version: 000
Supported board: mpu
PkgTime: Sep 25 2011 10:16:31
Version type: debug
169