Move - HP FlexFabric 7900 Series Command Reference Manual

Usage guidelines
To avoid file system corruption, do not install or remove storage media while the system is mounting
a storage medium.
To mount a partitioned storage medium, you must mount all the partitions individually, instead of
mounting the storage medium as a whole.
Examples
# In standalone mode, mount a USB disk.
<Sysname> mount usb0:
# In IRF mode, mount a USB disk on the master.
<Sysname> mount usb0:
# In IRF mode, mount a USB disk on the MPU that resides in member device 2.
<Sysname> mount chassis2#slot0#usb0:
Related commands
umount

move

Use move to move a file.
Syntax
move fileurl-source fileurl-dest
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
fileurl-source: Specifies the name of the source file.
fileurl-dest: Specifies the name of the destination file or folder.
Usage guidelines
If you specify a destination folder, the system moves the source file to the specified folder without
changing the file name.
Examples
# Move the flash:/test/sample.txt file to flash:/, and save it as 1.txt.
<Sysname> move test/sample.txt 1.txt
Move flash:/test/sample.txt to flash:/1.txt?[Y/N]:y
Moving file flash:/test/sample.txt to flash:/1.txt ...Done.
# Move the b.cfg file to the folder test2.
<Sysname> move b.cfg test2
Move flash:/b.cfg to flash:/test2/b.cfg?[Y/N]:y
Moving file flash:/b.cfg to flash:/test2/b.cfg... Done.
132