System-Working-Mode; Temperature-Limit - HP FlexFabric 7900 Series Command Reference Manual

system-working-mode

Use system-working-mode to set the system operating mode.
Use undo system-working-mode to restore the default.
Syntax
system-working-mode { advance | bridgee | standard }
undo system-working-mode
Default
The device operates in standard mode.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
advance: Sets the system operating mode to advanced.
bridgee: Sets the system operating mode to enhanced Layer 2.
standard: Sets the system operating mode to standard.
Usage guidelines
In different operating modes, the device supports different features. For example:
•
The device supports EVI and FCoE only when it operates in advanced mode. For more
information about EVI, see EVI Configuration Guide. For more information about FCoE, see
FCoE Configuration Guide.
•
The device supports SPBM only when it operates in enhanced Layer 2 mode. For more
information about SPBM, see SPB Configuration Guide.
•
The device supports VXLAN only when it operates in standard mode. For more information
about VXLAN, see VXLAN Configuration Guide.
For an operating mode change to take effect, you must perform the following tasks:
•
Save the running configuration to the next-startup configuration file.
•
Delete the.mdb file for the next-startup configuration file.
•
Reboot the device.
Examples
# Set the system operating mode to advanced.
<Sysname> system-view
[Sysname] system-working-mode advance
Do you want to change the system working mode? [Y/N]:y
The system working mode is changed, please save the configuration and reboot the system
to make it effective.

temperature-limit

Use temperature-limit to set the temperature alarm thresholds for the device.
Use undo temperature-limit to restore the default.
251