Ftp Client Commands; Append - HP FlexFabric 7900 Series Command Reference Manual

Predefined user roles
network-admin
mdc-admin
Parameters
minute: Specifies an idle-timeout interval in the range of 1 to 35791 minutes.
Usage guidelines
If no data transfer occurs on an FTP connection within the idle-timeout interval, the FTP server
closes the FTP connection to release resources.
Examples
# Set the FTP connection idle-timeout timer to 36 minutes.
<Sysname> system-view
[Sysname] ftp timeout 36

FTP client commands

Before executing FTP client configuration commands, make sure you have configured authorization
settings for users on the FTP server. Authorized operations include viewing the files in the working
directory, reading/downloading/uploading/renaming/removing files, and creating directories.
The FTP client commands in this section are supported by the device, but whether they can be
executed successfully depends on the FTP server.
The output in the examples of this section varies with FTP server types.

append

Use append to add the content of a file on the FTP client to a file on the FTP server.
Syntax
append localfile [ remotefile ]
Views
FTP client view
Predefined user roles
network-admin
mdc-admin
Parameters
localfile: Specifies a local file on the FTP client.
remotefile: Specifies a remote file on the FTP server.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Append the content of the local a.txt file to the b.txt file on the FTP server.
ftp> append a.txt b.txt
227 Entering Passive Mode (10,153,116,114,10,184)
150 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\125X\b.txt" file ready to
81