Free Ftp User-Ip; Ftp Server Acl - HP FlexFabric 12900 series Command Reference Manual

Parameters
username: Specifies a username. You can use the display ftp-user command to display FTP user
information.
Examples
# Release the FTP connections established by using the user account ftpuser.
<Sysname> free ftp user ftpuser
Are you sure to free FTP connection? [Y/N]:y
<Sysname>

free ftp user-ip

Use free ftp user-ip to manually release the FTP connections established from a specific IPv4 address.
Syntax
free ftp user-ip ipv4-address [ port port ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the source IP address of an FTP connection. You can use the display ftp-user
command to view the source IP addresses of FTP connections.
port port: Specifies the source port of an FTP connection. You can use the display ftp-user command to
view the source ports of FTP connections.
Examples
# Release the FTP connections established from IP address 192.168.20.184.
<Sysname> free ftp user-ip 192.168.20.184
Are you sure to free FTP connection? [Y/N]:y
<Sysname>

ftp server acl

Use ftp server acl to use an ACL to control FTP clients' access to the FTP server.
Use undo ftp server acl to restore the default.
Syntax
ftp server acl { acl-number }
undo ftp server acl
Default
No ACL is used to control FTP clients' access to the FTP server.
Views
System view
76