Bye - HP FlexFabric 7900 Series Command Reference Manual

mdc-admin
Usage guidelines
You can perform this operation only after you log in to the FTP server.
The carriage return characters vary with operating systems. For example, Hewlett Packard
Enterprise and Windows use /r/n, and Linux uses /n. To transfer files between two systems that
use different carriage return characters, determine FTP transfer mode according to the file type.
FTP transfers files in the following modes:
•
Binary mode—Transfers program file or pictures. This mode is also called "flow mode."
•
ASCII mode—Transfers text files.
Examples
# Set the file transfer mode to binary.
ftp> binary
200 TYPE is now 8-bit binary
Related commands
ascii

bye

Use bye to terminate the connection to the FTP server and return to user view.
If no connection is established between the device and the FTP server, use this command to return
to user view.
Syntax
bye
Views
FTP client view
Predefined user roles
network-admin
mdc-admin
Examples
# Terminate the connection to the FTP server and return to user view.
ftp> bye
221 Windows FTP Server (WFTPD, by Texas Imperial Software) says goodbye
<Sysname>
Related commands
quit
cd
Use cd to change the current working directory to another directory on the FTP server.
Syntax
cd { directory | .. | / }
83