Scheduler Reboot Delay; Scheduler Schedule - HP FlexFabric 7900 Series Command Reference Manual

scheduler reboot delay

Use scheduler reboot delay to specify the reboot delay time.
Use undo scheduler reboot to remove the reboot schedule configuration.
Syntax
scheduler reboot delay time
undo scheduler reboot
Default
No reboot delay time is specified.
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Specifies the reboot delay time in the hh:mm or mm format. This argument can contain up to six
characters. When in the hh:mm format, mm must be in the range of 0 to 59.
Usage guidelines
CAUTION:
Device reboot interrupts network services.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
The device supports only one device reboot schedule. If you configure both the schedule reboot
delay and schedule reboot delay commands or configure one of the commands multiple times, the
most recent configuration takes effect.
Examples
# Configure the device to reboot after 88 minutes. This example assumes that the current time is
11:48 a.m. on June 6, 2015.
<Sysname> scheduler reboot delay 88
Reboot system at 13:16 06/06/2015(in 1 hours and 28 minutes). Confirm? [Y/N]:

scheduler schedule

Use scheduler schedule to create a schedule and enter schedule view. If the schedule already
exists, you enter schedule view directly.
Use undo scheduler schedule to delete a schedule.
Syntax
scheduler schedule schedule-name
undo scheduler schedule schedule-name
Default
No schedule exists.
247