Mdc Commands For Non-Default Mdcs; Display Mdc; Display Mdc Interface - HP FlexFabric 7900 Series Command Reference Manual

Views
MDC view
Predefined user roles
network-admin
Usage guidelines
After an MDC is started, administrators of the MDC can log in to the MDC for MDC configuration and
maintenance.
Stop an MDC with caution. Stopping an MDC interrupts all services on the MDC and logs out all login
users on the MDC.
To avoid configuration loss, save the running configuration of an MDC before stopping the MDC.
Examples
# Start MDC sub1.
<Sysname> system-view
[Sysname] mdc sub1
[Sysname-mdc-2-sub1] mdc start
It will take some time to start MDC...
MDC started successfully.

MDC commands for non-default MDCs

This section describes the MDC commands that you can use after logging in to a non-default MDC.

display mdc

Use display mdc to display the ID, name, and status of the current MDC.
Syntax
display mdc
Views
Any view
Predefined user roles
mdc-admin
mdc-operator
Examples
# Display the ID, name, and status of the current MDC.
<sub1> display mdc
ID
2
For information about the command output, see

display mdc interface

Use display mdc interface to display the interfaces of the current MDC.
Name Status
sub1 active
Table 44.
269