Scheduler Reboot At - HP FlexFabric 7900 Series Command Reference Manual

Related commands
display scheduler logfile

scheduler reboot at

Use scheduler reboot at to specify the reboot date and time.
Use undo scheduler reboot to remove the reboot schedule configuration.
Syntax
scheduler reboot at time [ date ]
undo scheduler reboot
Default
No reboot date or time is specified.
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Specifies the reboot time in the hh:mm format, where hh is in the range of 0 to 23, and mm is in
the range of 0 to 59.
date: Specifies the reboot date in the MM/DD/YYYY or YYYY/MM/DD format. The YYYY value is in
the range of 2000 to 2035, the MM value is in the range of 1 to 12, and the value range for DD
depends on the month value.
Usage guidelines
CAUTION:
Device reboot interrupts network services.
When the date argument is not specified:
•
If the reboot time is later than the current time, a reboot occurs at the reboot time of the current
day.
•
If the reboot time is earlier than the current time, a reboot occurs at the reboot time the next day.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
The device supports only one device reboot schedule. If you configure both the schedule reboot
delay and schedule reboot delay commands or configure one of the commands multiple times, the
most recent configuration takes effect.
Examples
# Configure the device to reboot at 12:00 p.m. This example assumes that the current time is 11:43
a.m. on June 6, 2015.
<Sysname> scheduler reboot at 12:00
Reboot system at 12:00:00 06/06/2015 (in 0 hours and 16 minutes). Confirm? [Y/N]:
Related commands
scheduler reboot delay
246