Cdup - HP FlexFabric 7900 Series Command Reference Manual

Views
FTP client view
Predefined user roles
network-admin
mdc-admin
Parameters
directory: Specifies the name of the target directory in the format [drive:][/]path, where drive
represents the storage medium name, typically flash or cf. If the target directory does not exist, the cd
command does not change the current working directory. If no drive information is provided, the
argument represents a folder or subfolder in the current directory. For more information about the
drive and path arguments, see Fundamentals Configuration Guide.
..: Returns to the upper directory. Executing the cd .. command is the same as executing the cdup
command. If the current working directory is the FTP root directory, the cd .. command does not
change the current working directory.
/: Returns to the FTP root directory.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
The directory that can be accessed must be authorized by the FTP server.
Examples
# Change the working directory to the subdirectory logfile of the current directory.
ftp> cd logfile
250 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\125X\logfile " is current directory
# Change the working directory to the subdirectory diagfile in the FTP root directory.
ftp> cd /diagfile
250 "C:\diagfile " is current directory
# Change the working directory to the upper directory of the current directory.
ftp> cd ..
250 "C:\DOCUMENTS AND SETTINGS\ADMINISTRATOR\desk\125X" is current directory
# Change the working directory to the FTP root directory.
ftp> cd /
250 "C:\" is current directory
Related commands

cdup

pwd
cdup
Use cdup to enter the upper directory of the FTP server.
This command does not change the working directory if the current directory is the FTP root
directory.
Syntax
cdup
84