Display System-Working-Mode - HP FlexFabric 7900 Series Command Reference Manual

Table 36 Command output
Field
System state
Redundancy state
Role
State
*
Related commands
display device
display mdc

display system-working-mode

Use display system-working-mode to display system working mode information.
Syntax
display system-working-mode
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Description
System status:
•
Stable—The system is operating stably.
•
Not ready—The system is not operating stably. You cannot perform an ISSU
when the system is in this state.
System redundancy status:
•
Stable—Both MPUs are operating stably. You can perform a switchover.
•
No Redundance—The system has only one MPU. You cannot perform a
switchover.
•
Not Ready—The system is not operating stably. You cannot perform a
switchover.
Role of the card in the system:
•
Active—The card is the active MPU.
•
Standby—The card is the standby MPU.
•
Other—The card is not an MPU.
Card status:
•
Stable—The card is operating stably.
•
Board Inserted—The card has just been installed.
•
Kernel Init—Card kernel is being initialized.
•
Service Starting—Services are starting.
•
Service Stopping—Services are stopping.
•
HA Batch Backup—An HA batch backup is going on.
•
Interface Data Batch Backup—An interface data batch backup is in progress.
•
MDC Starting—MDCs are starting.
•
MDC Stopping—MDCs are stopping.
The object is not operating stably.
225