Display Saved-Configuration - HP FlexFabric 7900 Series Command Reference Manual

#
- sysname test
+ sysname test1
#
telnet server enable
#
# Display the configuration differences between test.cfg and testsys.cfg on the master and
subordinate devices in an HPE 7904/HPE 7904 TAA IRF fabric.
<Sysname> display diff configfile chassis1#slot0#flash:/test.cfg configfile
chassis2#slot0#flash:/testsys.cfg
--- flash:/test.cfg
+++ chassis2#slot0#flash:/testsys.cfg
@@ -6,7 +6,7 @@
#
stp global enable
#
- sysname TEST
+ sysname TEST1
#
telnet server enable
#
# Display the configuration differences between the running configuration and the next-startup
configuration file.
<TEST> display diff current-configuration startup-configuration
--- Current configuration
+++ Startup configuration
@@ -6,7 +6,7 @@
#
stp global enable
#
- sysname TEST
+ sysname TEST1
#
telnet server enable
#
For information about the command output descriptions, see
Related commands
•
display current-configuration
•
display current-configuration diff
•

display saved-configuration

display saved-configuration
Use display saved-configuration to display the contents of the configuration file for the next
system startup.
Table
147
18.