Display Telnet Client; Display User-Interface - HP 6125XLG Command Reference Manual

Table 2 Command output
Fields
number:status

display telnet client

Use display telnet client to display the source IPv4 address or source line configured for the device to use
for outgoing Telnet packets when serving as a Telnet client.
Syntax
display telnet client
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the Telnet client configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client
The source IP address is 1.1.1.1.
The output shows that the device uses the source IPv4 address 1.1.1.1 for outgoing Telnet packets when it
serves as a Telnet client.
Related commands
telnet client source

display user-interface

Use display user-interface to display user line information.
Syntax
display user-interface [ number1 | { aux | console |vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
The number indicates the absolute number of the first user line of the user line class,
starting from 0. The status indicates whether the user lines of the user line class are
being used (X for unused and U for used).
For example, if "0:UXXX XXXX XX" is displayed, there are ten user lines of the user line
class, which use the absolute numbers 0 through 9. User line 0 is being used. The
other user lines are not.
20