Display Telnet Client - HP FlexFabric 12900 series Command Reference Manual

Examples
# Display user line information.
<Sysname> display line 1
Idx Type
F 1 AUX 1
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 2 Command output
Field Description
Whether the modem allows calling in or out. By default, this attribute is not configured and a hyphen
Modem
(-) is displayed.
# In IRF mode, display summary information about all user lines.
<Sysname> display line summary
Line type : [AUX]
Line type : [VTY]
9 lines used.
63 lines not used.
Table 3 Command output
Fields
number:status

display telnet client

Use display telnet client to display the source IPv4 address or source line configured for the device to use
for outgoing Telnet packets when serving as a Telnet client.
Tx/Rx Modem Auth
9600 -
0:XUXX XXXX
8:UUXU UUUU UXXX XXXX
24:XXXX XXXX XXXX XXXX
40:XXXX XXXX XXXX XXXX
56:XXXX XXXX XXXX XXXX
(U)
(X)
Description
The number indicates the absolute number of the first user line of the user line class.
The status indicates whether or not the user lines are being used (X for unused and U
for used).
For example, if "0:XUXX XXXX" is displayed, the user line class has eight user lines.
The user lines use the absolute numbers 0 through 7. User line 1 is being used, and the
others are not.
Int
N -
20