Display Telnet Client Configuration; Display User-Interface - HP 6125G Command Reference Manual

Field
Operation status

display telnet client configuration

Syntax
display telnet client configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display telnet client configuration to display the configuration of the device when it serves as a Telnet
client.
Examples
# Display the configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.
The output shows that when the device serves as a client, the source IPv4 address for sending Telnet
packets is 1.1.1.1.

display user-interface

Syntax
display user-interface [ num1 | { aux | vty } num2 ] [ summary ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Description
Operation status:
•
Running—The HTTPS service is enabled.
•
Stopped—The HTTPS service is disabled.
21