Section 3
HMI500
3.9.5.4
3.9.5.5
3.9.6
70
Database locations
HMI500 creates a number of configuration databases. The following dialog
provides facility for defining the directories where the databases are located and
changing the database names. Default directories are created during the installation
of HMI500 and it is recommended that these not be changed.
PSM support (option)
HMI500 automatically displays this directory when E_Wineve (installation file
available on REB500 Product CD) is installed on the PC. The directory enables
you to verify the response of E_Wineve after disturbance recorder data have been
transferred.
1. Check the box "Send notification after automatically uploading data" to obtain
notification as to which disturbance recorder data have been sent. For this
purpose, E_wineve has to have been started in the batch mode.
2. Check the box "Evaluate after manually uploading data from the protection
system" to be offered the possibility of evaluating disturbance recorder data
using E_wineve after they have been manually transferred.
3. The button "Select PSM" provides facility for locating the
E_wineve installation to be used for evaluating disturbance recorder data.
Figure 56
PSM support settings
Security account management
The menu is only active if the HMI500 communication is online with the
protection system. See "Security deployment guideline"
1MRK 500 124-UEN
Operation Manual
Distributed busbar protection REB500