Parallel Port Configuration - IEI Technology KINO-PVN-D5251 User Manual

5.3.5.2 Parallel Port Configuration

Use the Parallel Port Configuration menu (BIOS Menu 8) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port
Device Settings
Device Mode
Change Settings
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 9: Parallel Port Configuration Menu

Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.

Disabled

Enabled

Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.

Auto

IO=378h;
IRQ=7

IO=278h;
IRQ=7
Page 74
KINO-PVN-D5251/D4251/ Mini ITX SBC
[Enabled]
IO=378h; IRQ=7
[Printer Mode]
[Auto]
Disable the parallel port
D Enable the parallel port
EFAULT
D The parallel port IO port address and interrupt
EFAULT
address are automatically detected.
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7
: Select Screen
 : Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit