Serial Port N Configuration; Bios Menu 13: Serial Port N Configuration Menu - IEI Technology NANO-QM770-R10 User Manual

NANO-QM770 EPIC SBC

5.3.10.1 Serial Port n Configuration

Use the Serial Port n Configuration menu (BIOS Menu 13) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

BIOS Menu 13: Serial Port n Configuration Menu

5.3.10.1.1 Serial Port 1 Configuration

Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled

Enabled

Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto

IO=3F8h;
IRQ=4
[Enabled]
IO=3F8h; IRQ=4
[Auto]
Disable the serial port
Enable the serial port
D
EFAULT
The serial port IO port address and interrupt address
D
EFAULT
are automatically detected.
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ4
Enable or Disable Serial
Port (COM)
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Page 73