Dual:function[1]|2:Frequency; Dual:function[1]|2:Shape; Dual:function[1]|2:Shape:ramp - Keysight N5171B EXG Manual

Analog Modulation Commands
Low Frequency Output Subsystem ([:SOURce]:LFOutput)
Key Entry

:DUAL:FUNCtion[1]|2:FREQuency

[:SOURce]:LFOutput:DUAL:FUNCtion[1]|2:FREQuency
<value><unit>
[:SOURce]:LFOutput:DUAL:FUNCtion[1]|2:FREQuency?
This command sets the frequency of tone 1 (default) or tone 2 of the internal
dual function generator source.
Range
Key Entry

:DUAL:FUNCtion[1]|2:SHAPe

[:SOURce]:LFOutput:DUAL:FUNCtion[1]|2:SHAPe
SINE|TRIangle|SQUare|RAMP
[:SOURce]:LFOutput:DUAL:FUNCtion[1]|2:SHAPe?
This command sets the shape of tone 1 (default) or tone 2 of the internal dual
function generator source.
Key Entry

:DUAL:FUNCtion[1]|2:SHAPe:RAMP

[:SOURce]:LFOutput:DUAL:FUNCtion[1]|2:SHAPe:RAMP
POSitive|NEGative
[:SOURce]:LFOutput:DUAL:FUNCtion[1]|2:SHAPe:RAMP?
This command sets the ramp direction of the selected tone (1 or 2) of the
internal dual function generator source when :DUAL:FUNCtion[1]|2:SHAPe is
set to RAMP.
Key Entry
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
LF Out Tone 2 Phase Offset
Supported All Models with Options UNT and 303
*RST 400.0 Hz
100.0 mHz to 6.25 MHz
LF Out Tone 1 Freq
Supported All Models with Options UNT and 303
*RST
SINE
LF Out Tone 1 Waveform
Supported All Models with Options UNT and 303
*RST POS
Pos Ramp
LF Out Tone 2 Freq
LF Out Tone 2 Waveform
Neg Ramp
273