Catalog[:All]; Copy[:Name] - Keysight N5171B EXG Manual

System Commands
Memory Subsystem (:MEMory)

:CATalog[:ALL]?

:MEMory:CATalog[:ALL]?
This query outputs a list of all the files in the memory subsystem. However it
does not include files stored on the Option 653, 655, 656, or 657 baseband
generator. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as
many file listings as there are files in the memory subsystem. Each file listing
parameter will be in the following form:
"<file name,file type,file size>"
Example Output
1818624,519962624,0_00@STATE,STAT,641","0_01@STATE,STAT,669"
,"A@NVHDR,NVHDR,132","A@NVMKR,NVMKR,0","A@NVWFM,NVWFM,9","CO
PY12@STATE,STAT,669","FLAT_1@USERFLAT,UFLT,16","GEN_FILE11@B
INARY,BIN,5","LAST@LIST,LIST,122","LAST@USERFLAT,UFLT,16","P
ERSISTENT@STATE,STAT,1056",SEQ1_TEST@SEQ,SEQ,206

:COPY[:NAME]

:MEMory:COPY[:NAME] "<file name>","<file name>"
This command makes a duplicate of the requested file.
162
Remarks Refer to
information on the file name syntax.
Supported All Models
Key Entry All
Remarks Refer to the
types and the table on
"<file name>" syntax.
Supported All Models
Key Entry Copy File
Remarks Refer to File Name Variables for information on the file
name syntax.
When copying a waveform file from volatile to
non–volatile memory, the marker file and file header,
associated with the waveform file, will automatically be
copied at the same time.
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
"File Name Variables" on page 43
Table 1-3 on page 45
page 46
for
for a listing of the file
for information on the