Trigger:type:continuous[:Type] - Keysight N5171B EXG Manual

X-series signal generators
Hide thumbs Also See for N5171B EXG:
Table of Contents

Advertisement

Arb Commands
Dual ARB Subsystem–N5172B/82B ([:SOURce]:RADio:ARB)
— Selecting the trigger source (see
— Setting the trigger polarity when using an external source:
To check the trigger status, see
information on triggering, see the User's Guide.
The following list describes the trigger type command choices:
Key Entry

:TRIGger:TYPE:CONTinuous[:TYPE]

[:SOURce]:RADio:ARB:TRIGger:TYPE:CONTinuous[:TYPE]
FREE|TRIGger|RESet
[:SOURce]:RADio:ARB:TRIGger:TYPE:CONTinuous[:TYPE]?
378
— SADVance, see
— GATE, selecting the mode also sets the response
determines how the Keysight X-Series signal generator receives its trigger
signal, internally or externally. The GATE choice requires an external trigger.
— CONTinuous, SINGle, and SADVance see
":TRIGger[:SOURce]:EXTernal:SLOPe" on page 383
— GATE, see
":TRIGger:TYPE:GATE" on page 379
CONTinuous
Upon triggering, the waveform repeats continuously.
SINGle
Upon triggering, the waveform segment or sequence
plays once.
SADVance
The trigger controls the segment advance within a
waveform sequence. To use this choice, a waveform
sequence must be the active waveform. Ensure that all
segments in the sequence reside in volatile memory.
GATE
An external trigger signal repeatedly starts and stops
the waveform's playback (transmission). The time
duration for playback depends on the duty period of the
trigger signal and the gate polarity selection (see
":TRIGger:TYPE:GATE" on page
plays during the inactive state and stops during the
active polarity selection state. The active state can be
set high or low. The gate mode works only with an
external trigger source.
With the multiple baseband generator synchronization
feature active, GATE is unavailable (see
more information).
*RST
CONT
Continuous
Supported
N5172B/82B
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
":TRIGger:TYPE:SADVance[:TYPE]" on page 380
":TRIGger[:SOURce]" on page
":REGister[:STATus]" on page
Single
381), which
371. For more
379). The waveform
page 355
Gate
Segment Ad vance
for

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

N5173b exgN5182b mxgN5183b mxgN5181b mxgN5172b exg

Table of Contents