System Commands
System Subsystem (:SYSTem)
:PMETer[1]|2:SENSe:AVERage:COUNt:AUTO
:SYSTEm:PMETer[1]|2:SENSe:AVERage:COUNt:AUTO ON|OFF|1|0
:SYSTEm:PMETer[1]|2:SENSe:AVERage:COUNt:AUTO?
This command enables or disables the automatic averaging mode for Channel
A or B. The query returns the state of the automatic averaging mode.
:PMETer[1]|2:SENSe:AVERage[:STATe]
:SYSTem:PMETer[1]|2:SENSe:AVERage[:STATe] ON|OFF|1|0
:SYSTem:PMETer[1]|2:SENSe:AVERage[:STATe]?
This command enables or disables averaging for Channel A or B. The query
returns the state of averaging.
:PMETer[1]|2:SENSe:FREQuency[:CW|:FIXed]
:SYSTem:PMETer[1]|2:SENSe:FREQuency[:CW|:FIXed] <freq><unit>
:SYSTem:PMETer[1]|2:SENSe:FREQuency[:CW|:FIXed]?
This command sets channel frequency for channel A or B. The query returns
the value.
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
Default:
1024
Supported
All Models
Key Entry
Averaging Mode
Default:
Auto
Supported
All Models
Key Entry
Averaging Mode
Supported
All Models
Key Entry
Channel Frequency
Default
50 MHz
225