Delete:state; Delete:uflt; Delete[:Name]; Export[:Ascii]:Ptrain - Keysight N5171B EXG Manual

System Commands
Memory Subsystem (:MEMory)

:DELete:STATe

:MEMory:DELete:STATe
This command deletes all state files.

:DELete:UFLT

:MEMory:DELete:UFLT
This command deletes all user–flatness correction files.

:DELete[:NAME]

:MEMory:DELete[:NAME] "<file name>"
This command clears the user file system of "<file name>".

:EXPort[:ASCii]:PTRain

:MEMory:EXPort[:ASCii]:PTRAin <"filename">
This command writes out a CSV/ASCII file to the BINARY directory. User may
supply their own extender as part of the filename. Refer to
:EXPort[:ASCii]:SEParator:COLumn and :EXPort[:ASCii]:SEParator:DECimal.
Example
:MEM:EXP:PTR "myfile.csv"
The preceding example saves a power train file to "myfile.csv".
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
Supported All Models
Key Entry Delete All State Files
Supported All Models
Key Entry Delete All UFLT Files
Supported All Models
Key Entry Delete File
Remarks Refer to File Name Variables for information on the file
name syntax.
When deleting a waveform (WFM1) file from memory,
the marker file and file header, associated with the
waveform file, will also be deleted.
Supported All with Option 320 and either UNU or UNW
Key Entry Export To File
177