System Commands
Display Subsystem (:DISPlay)
[:WINDow][:STATe]
:DISPlay[:WINDow][:STATe] ON|OFF|1|0
:DISPlay[:WINDow][:STATe]?
This command is used to either blank out (OFF or 0) the display screen or turn
it on (ON or 1).
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
OFF (0)
This choice turns off the display (Text Area) updating
while further optimizing the signal generator for speed.
No Text Area updates occur but the Frequency Area,
Amplitude Area, and status LEDs continue to update.
For more information on the front-panel display
description, refer to the User's Guide.
Key Entry
Update in Remote Off On
Remarks
The setting enabled by this command is not affected by
signal generator preset or *RST. However, cycling the
signal generator power will reset it to zero.
Supported
All Models
Remarks
*RST and presetting the signal generator or cycling the
power will turn the display on.
149