Error[:Next]; Error:scpi[:Syntax]; Filesystem:storage:external - Keysight N5171B EXG Manual

System Commands
System Subsystem (:SYSTem)
The Keysight MXG deletes the error messages from the front-panel error queue
after viewing the last message.
Key Entry

:ERRor[:NEXt]

:SYSTem:ERRor[:NEXt]?
This query returns the next error message from the signal generator SCPI error
queue. If there are no error messages, the query returns the following output:
When there is more than one error message, the query will need to be sent for
each message.
The Keysight MXG deletes the error messages from the front-panel error queue
after viewing the last message.
Key Entry

:ERRor:SCPI[:SYNTax]

:SYSTem:ERRor:SCPI[:SYNTax] ON|OFF|1|0
:SYSTem:ERRor:SCPI[:SYNTax]?
This command enables or disables the reporting of SCPI syntax errors to the
error queue.
The setting ON/1 is persistent through Preset and *RST. It is cleared to OFF/0
by sending SYST:PRES:ALL or cycling the power of the signal generator.

:FILesystem:STORage:EXTernal

:SYSTem:FILesystem:STORage:EXTernal?
This query checks to see if the external USB port is actively being used for data
storage and retrieval on the signal generator. A returned value of 1 means the
external USB media is being used for data storage and retrieval. For more
information on non–volatile storage media settings, refer to
:FILesystem:STORage:EXTernal:PATH, :FILesystem:STORage:TYPE and
:FILesystem:STORage:TYPE:AUTO commands.
212
Error Info
Supported All Models
+0,"No error"
Error Info
Supported All Models
Supported All Models
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
View Next Error Message
View Next Error Message