Psc; Rcl; Rst - Keysight N5171B EXG Manual

System Commands
IEEE 488.2 Common Commands
The options (OPT) query returns a comma separated list of all of the instrument
options currently installed on the signal generator.

*PSC

*PSC ON|OFF|1|0
The Power–On Status Clear (PSC) command controls the automatic power–on
clearing of the Service Request Enable Register, the Standard Event Status
Enable Register, and device–specific event enable registers.
*PSC?
*PSC?
The Power–On Status Clear (PSC) query returns the flag setting as enabled by
the *PSC command.

*RCL

*RCL <reg>,<seq>
The Recall (RCL) command recalls the state from the specified memory register
<reg> of the specified sequence <seq>.
Range
Key Entry

*RST

*RST
152
Key Entry Instrument Options
Supported All Models
ON (1) This choice enables the power–on clearing of the listed
registers.
OFF (0) This choice disables the clearing of the listed registers
and they retain their status when a power–on condition
occurs.
Remarks The setting enabled by this command is not affected by
signal generator power–on, preset, or *RST.
Supported All Models
Supported All Models
Registers: 0 to 99
RECALL Reg
Supported All Models
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
Sequences: 0 to 9
Select Seq: