Capture; Cmap:default; Remote - Keysight N5171B EXG Manual

System Commands
Display Subsystem (:DISPlay)

:CAPTure

:DISPlay:CAPTure
This event command enables the user to capture the current display and store
it in the signal generator's memory.

:CMAP:DEFault

:DISPlay:CMAP:DEFault [<palette:BRIGht|DARK|MONOchrome>]
This command selects the color palette for the instrument display.
Key Entry

:REMote

:DISPlay:REMote ON|OFF|1|0
:DISPlay:REMote?
This command enables or disables the display updating when the signal
generator is remotely controlled.
148
Supported All Models
Remarks The display capture is stored as DISPLAY.BMP in the
Binary Directory file system. This file is overwritten with
each subsequent display capture. The file can be
down–loaded in the following manner:
1. Log on to the signal generator using ftp.
2. Change (cd) to the BIN directory.
3. Retrieve the file by using the GET command or by
using the :MEM:DATA query on
Supported All Models
Bright Color
Remarks The setting enabled by this command is not affected by
signal generator power–on, preset, or *RST.
Supported All Models
ON (1) This choice updates the signal generator display (Text
Area) so you can see the settings as the commands are
executed, however, this will degrade the signal
generator speed. Frequency Area, Amplitude Area, and
status LEDs continue to update. For more information
on the front-panel display description, refer to the
User's Guide.
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
page
Dark Color Monochrome
163.