Dataview ® Software; Installing Dataview - AEMC 8220 User Manual

Single-phase power quality analyzer

Table of Contents

DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE

SOFTWARE AND DRIVERS.

NOTE: When installing, the user must have Administrative access rights

during the installation. The users access rights can be changed after the

installation is complete.

DataView

must be reinstalled for each user in a multi-user system.

USB Flash Drive Install

1. Insert the USB stick into an available USB port (wait for driver to be installed).

2. If Autorun is enabled then an AutoPlay window should appear as shown.

NOTE: If Autorun is disabled, it will be necessary to open Windows Explorer, then

locate and open the USB stick drive labeled "DataView" to view the files on the

drive.

3. In the AutoPlay window, select Open Folder to view Files.

4. Double-click on Setup.exe from the opened folder view to launch the Data-

View setup program.

Power Quality Analyzer Model 8220

CHAPTER 5

DATAVIEW

SOFTWARE

Table of Contents