5-bin mailbox sensor (input) assembly removal
1.
Remove the 5-bin mailbox option from the printer.
2.
Remove the bottom mailbox output bin roller. See
page
4-325.
3.
Release the tabs holding the sensor, and then remove the sensor with its cable.
5-bin mailbox sensor (pass thru) assembly removal
See
"5-bin mailbox assembly (interior)" on page 7-49
1.
Remove the 5-bin mailbox option from the printer.
2.
Remove the 4th mailbox output bin roller.
3.
Release the tabs holding the sensor, and then remove the sensor with its cable.
"5-bin mailbox output bin roller removal" on
for the part number.
Repair information
7562
Previous
Next
Go Back
4-329