5-Bin Mailbox Assembly Sensor (Pass Thru) Removal - Lexmark C792e 5062-210 Service Manual

5062

5-bin mailbox assembly sensor (pass thru) removal

1.
Remove the 5-bin mailbox option from the printer.
2.
Remove the 4th mailbox output bin deflector. See
page 4-236.
3.
Disconnect the pass thru cable from the controller card.
4.
Release the tabs (A) holding the sensor, and then remove the sensor with its cable.
4-226
Service Manual
"5-bin mailbox output bin deflector removal" on