Set up, install, and configure
Setting up the printer to fax
Supported fax
Printer model
CX730
CX735
XC4342
XC4352
1
Needs an installed fax card to use analog fax.
2
Needs a subscription. For more information, go to
you purchased the printer.
3
Needs a subscription for the fax server to work.
4
Needs an installed license bundle. For more information, contact the place where you purchased the printer.
Setting up the fax function using analog fax
Notes:
•
For some printer models, a fax card must be installed for the printer to use analog fax.
•
Some connection methods are applicable only in some countries or regions.
•
If the fax function is enabled and not fully set up, then the indicator light may blink red.
•
If you do not have a TCP/IP environment, then use the control panel to set up fax.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Analog fax
1
1
2
etherFAX
https://www.etherfax.net/lexmark
3
Fax server
Fax over IP (FoIP)
or contact the place where
31
4