High Capacity Input Tray (Hcit) Tray Lift Drive Motor Assembly Removal - Lexmark T650 Service Manual

Hide thumbs Also See for T650:

Table of Contents

2. Remove the three screws (A) securing the HCIT drawer slide to the frame of the drawer.

3. Remove the HCIT drawer slide.

High capacity input tray (HCIT) tray lift drive motor assembly removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.

1. Remove the HCIT cover, right. Go to

"High capacity input tray (HCIT) cover, right removal" on

2. Remove the HCIT cover, left. Go to

"High capacity input tray (HCIT) cover, left removal" on

3. Disconnect the HCIT tray lift drive motor cable connector from the HCIT controller card assembly.

Note: Remove the cable from the restraint, and observe the routing for reinstallation.

Repair Information

T652dn T650n T654dn T656dne