Displaying Information Related To Path Trace Cache Entries; Displaying Cfm Global Configuration - Avaya 2330 Manual

Displaying information related to path trace cache entries

Use the commands in this section to view information related to path trace cache entries.
Procedure steps
To display path trace cache entries logged to the Secure Router 2330/4134 since a
reset or clear, enter:
show cfm linktrace-cache [session <session id>] [mep <mep id>]
[rmep-id <rmep id>] [ma <WORD>] [md <WORD>] [mac-addr <mac
addr>]
Table 31: Variable definitions
<mep id>
<rmep id>
md <WORD>
ma <WORD>
<mac addr>
<session id>

Displaying CFM global configuration

Use the commands in this section to view information related to CFM global configuration.
Procedure steps
To display CFM global configuration, enter:
Configuration — Layer 2 Ethernet
Variable
Displaying Ethernet CFM information
Value
The numerical identifier for the MEP. Values
are in the range from 1 to 8191.
The numerical identifier for the remote MEP.
Values are in the range from 1 to 8191.
The short name of the MD (up to eight
characters). For example
The short name of the MA (up to eight
characters). For example
The MAC address of the remote host. Enter
a MAC address in the form
aa:bb:cc:dd:ee:ff.
The linktrace test session ID. Values are in
the range 1 to 4294967295.
MD1
.
MA1 .
July 2013 75