Configuring An Mstp Instance; Creating An Mstp Instance - Avaya 2330 Manual

Figure 21: Point-to-point link
When devices are connected through a hub (or any broadcasting device), the link is a shared
link. MSTP requires more time for convergence over a shared link (that is, compared to a point-
to-point link). The following figure shows a shared link.
Figure 22: Shared link

Configuring an MSTP instance

Use the procedures in this section to configure MSTP instances.

Creating an MSTP instance

Use the procedure in this section to create an MSTP instance.
Configuration — Layer 2 Ethernet
Configuring an MSTP instance
July 2013 157