Configuration On Switch_2 - Avaya 2330 Manual

2. To select Ethernet interface 6/1, enter:
3. To specify the LACP configuration context, enter:
4. To configure the channel group, enter:
5. To exit the LACP configuration context, enter:
6. To de-select Ethernet interface 6/1, enter:
7. To select Ethernet interface 6/2, enter:
8. To specify the LACP configuration context, enter:
9. To configure the channel group, enter:

Configuration on SWITCH_2

Procedure steps
1. To access configuration mode, enter:
2. To select Ethernet interface 6/1, enter:
3. To specify the LACP configuration context, enter:
4. To configure the channel group, enter:
5. To exit the LACP configuration context, enter:
6. To de-select Ethernet interface 6/1, enter:
Configuration — Layer 2 Ethernet
configure terminal
interface ethernet 6/1
lacp
channel-group 1 mode active
exit
exit
interface ethernet 6/2
lacp
channel-group 1 mode active
configure terminal
interface ethernet 6/1
lacp
channel-group 1 mode active
exit
Example of configuring LACP
July 2013 113