Associating A Vlan With An Instance - Avaya 2330 Manual

Multiple Spanning Tree Protocol configuration
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To access the MSTP command context, enter:
4. To create an instance, enter:
Table 80: Variable definitions
<instance id>

Associating a VLAN with an instance

Use the procedure in this section to associate a VLAN with an MSTP instance.
Prerequisites
• You must have created the VLAN.
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To access the MSTP command context, enter:
4. To select the MSTP instance, enter:
5. To associate a VLAN with the MSTP instance, enter:
158 Configuration — Layer 2 Ethernet
configure terminal
bridge
mstp
instance <instance id>
Variable
configure terminal
bridge
mstp
instance <instance id>
vlan <vid>
Comments? infodev@avaya.com
Value
Specifies the MSTP instance ID. Valid values
are 0 to 15.
July 2013