Configuration Of The Secure Router 2330/4134 On Interface C - Avaya 2330 Manual

Configuration of the Secure Router 2330/4134 on interface C

In the following procedure, you configure the interface as a trunk (same as interface B) in Steps
1–5. You enable VLAN stacking after setting the interface to trunk mode (Steps 6–7).
Procedure steps
1. To access configuration mode, enter:
2. To select an interface (in this example, bundle IfC), enter:
3. To add the T1 interface at slot 4, port 1 to the bundle interface, enter:
4. To configure the encapsulation on the interface, enter:
5. To configure the port as a Layer 2 interface, enter:
6. To enable VLAN stacking on the interface, enter:
7. To change the VLAN assignment for the interface, enter:
Configuration — Layer 2 Ethernet
configure terminal
interface bundle IfC
link t1 4/1
encapsulation ppp
switchport mode trunk
switchport mode access vlan-stacking
switchport pvid 1000
Example of configuring VLAN stacking
July 2013 131