Chapter 12: Vlan Configuration; Creating A Vlan; Removing A Vlan - Avaya 2330 Manual

Chapter 12: VLAN configuration

Use the procedures in this section to create or remove VLANs from the system.

Creating a VLAN

Use the procedure in this section to create VLANs in the bridge global database.
Procedure steps
1. To access configuration mode, enter:
2. To access the VLAN database, enter:
3. To create a VLAN, enter:
Table 49: Variable definitions
name <WORD>
<vid>

Removing a VLAN

Use the procedure in this section to remove a VLAN from the database.
Procedure steps
1. To access configuration mode, enter:
2. To access the VLAN database, enter:
Configuration — Layer 2 Ethernet
configure terminal
vlan database
vlan <vid> [name <WORD>]
Variable
configure terminal
Value
The name that you assign to the VLAN. This
parameter is optional.
The VLAN identification number that you
assign. Valid values are 2 to 4000.
July 2013 115