Configuring A Protocol-Based Vlan Classification Rule - Avaya 2330 Manual

VLAN classification configuration

Configuring a protocol-based VLAN classification rule

Procedure steps
1. To access configuration mode, enter:
2. Enter the configuration context:
3. To create a protocol-based VLAN classification rule, enter:
Table 52: Variable definitions
<id>
<protocol>
<encapsulation>
122 Configuration — Layer 2 Ethernet
configure terminal
vlan classification
rule <id> protocol <protocol> encap <encapsulation>
Variable
Comments? infodev@avaya.com
Value
The VLAN classifier rule ID. Valid values are
1 to 12.
The protocol parameter is either a number
(from 0 to 65535), or one of the following:
• ipv4
• ipv6
• mpls
• arp
• rarp
• vlan-tagged
• appletalk
• ipx
• pppoe-disc
• pppoe-session
The encapsulation type. Enter one of the
following:
• ethv2
• llcsnap
• llc
July 2013