Selectable Range Of Ports - Avaya 2330 Manual

Layer 2 fundamentals
The port mirroring feature supports both ingress (incoming traffic) and egress (outgoing traffic)
port mirroring. When port mirroring is enabled, the ingress or egress packets of the mirrored
(source) port are forwarded normally and a copy of the packets is sent out of the mirrored port
to the mirroring (destination) port.
To avoid seeing unintended traffic, remove mirroring (destination) ports from all virtual local
area networks (VLAN) and multiple spanning tree instances (MSTIs). When mirroring ports
where VLAN tagging is enabled, the VLAN tags are not included in the packets received at the
mirroring (destination) port.
The port mirroring feature is supported only on the module Ethernet ports. You can configure
a maximum of one analyzer (destination) port for each module.

Selectable range of ports

With Release 10.2 and later, you can specify a range of Ethernet ports to configure at the same
time. To do so, you must use the interface range ethernet command.
44 Configuration — Layer 2 Ethernet
Comments? infodev@avaya.com
July 2013