Table 74: Variable definitions
<time value>
Restoring the default forward delay value
Use the procedure in this section to restore the forward delay value to the default setting (15
seconds).
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To restore the forward value to the default setting, enter:
Table 75: Variable definitions
<time value>
Configuration — Layer 2 Ethernet
Variable
configure terminal
bridge
no forward-delay <time value>
Variable
Configuring Common Spanning Tree
Value
Specifies the forward time delay, expressed
in seconds. The default value is 15 seconds.
Valid values are 4 to 30 seconds.
Value
Specifies the currently configured forward
time delay, expressed in seconds. The
default value is 15 seconds. Valid values are
4 to 30 seconds.
July 2013
153