Configuring avaya wireless lan controller 8180 with avaya 8120 access points to support avaya a175 desktop video devices using 802.1x authentication – issue 1.0 (24 pages)
Page 2
Avaya does not guarantee that these links will work all the time and has no control over the availability of the linked pages.
Page 3
Contact Avaya Support Avaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is 1-800-242-2121 in the United States. For additional support telephone numbers, see the Avaya Web site http://www.avaya.com/support...
Web Browser requirements for accessing the SCS system ......8 Gateway Configuration from the SCS - (FXO/T1/E1/PRI) ..... 11 Gateway Configuration from the SCS - (FXS) ....... 16 AG/SR 2330 - Gateway Configuration ........... 16 General Configuration ..............17 T1/E1/PRI Configuration ..............17 FXO Configuration .................
AG 2330 Installation Reference SCS 4.0 - AG2330 Installation Reference Guide Overview The Advanced Gateway 2330 can be configured to provide a number of voice interfaces that allow connection to the PSTN as well as support of conventional TDM-based telephony devices. The gateway can be configured with T1/E1 PRI, BRI, FXS and FXO interfaces providing flexible telephony connection for SCS users.
AG 2330 Installation Reference AG 2330 Front Panel Required Information The following questions should be considered for the successful installation and configuration of the AG 2330: Which line modules will be used with the gateway – FXO. T1 / E1, PRI, BRI? ...
Profiles Guide and the SCS 4.0 Device Configuration – Gateway Guide section of this guide Configure the AG 2330 from the command line Refer to the “AG/SR 2330 Gateway Configuration” section of this guide Configure the gateway‟s general network parameters Refer to the “General Configuration”...
The SCS 4.0 now supports interoperability with the Avaya AG/SR 2330 gateway. The following steps have been documented to assist in the configuration process so that the SCS will interface and function with the Avaya AG/SR 2330. SCS Configuration Accessing the SCS Programming Interface...
Page 9
AG 2330 Installation Reference 4. Click on Add Exception. 5. Click Get Certificate. This is a default certificate installed by the system at the point of installation to ensure security. To avoid exception messages in the future you can install a trusted certificate from within the browser – open the System menu and select Web Certificates.
Page 10
AG 2330 Installation Reference 6. Now click Confirm Security Exception. 7. You will be presented with the initial login screen. Enter the user id superadmin and the password (PIN) previously defined by the administrator. Then click the Login button. NN40010-551 Issue 1.3 SCS 4.0...
AG 2330 Installation Reference 8. You will be presented with the SCS Interface. 9. The SCS can now be configured with the required gateways. Gateway Configuration from the SCS - (FXO/T1/E1/PRI) The SCS system can be configured, so that local users can dial using the PSTN services of the gateway.
Page 12
AG 2330 Installation Reference 2. From the Gateways screen, select Unmanaged gateway from the Add New Gateway drop down box. 3. The gateway configuration screen will be displayed. In the Name field enter a name for the remote SCS system. NN40010-551 Issue 1.3 SCS 4.0...
Page 13
AG 2330 Installation Reference 4. In the Address field, enter the fully qualified hostname or IP address of the gateway example: itel2.iteluk.com. Note: If SRV records are not being used for DNS resolution, then the Fully Qualified Domain Name is required e.g. scsitel3.iteluk.com. If SRV records are being used then only the domain name is required e.g.
Page 14
AG 2330 Installation Reference 6. Shared check box: If checked this gateway can be used by any user in any location, even if a specific location is selected. Therefore, users in an identified location can still use their preferred gateway, but the gateway can also be used by other users in other locations.
Page 15
AG 2330 Installation Reference 8. Click the Apply button followed by the OK button. 9. Your configured gateway will be displayed. Select the check box for the created gateway and click the Send Profiles button. NN40010-551 Issue 1.3 SCS 4.0...
4.0 Configuring User Profiles Task Based Guide. General configuration details for FXS Gateways are included in the SCS 4.0 Device Configuration – Gateways Task Based Guide. AG/SR 2330 - Gateway Configuration To configure the Gateway please refer to the Advanced Gateway 2330 Commissioning documentation (NN47264-302).
AG 2330 Installation Reference General Configuration There are a number of general network parameters that need to be defined as part of the gateway‟s configuration: The IP Address of Gateway The Subnet Mask of Gateway The SIP Domain – SIP Domain assigned in SCS ...
AG 2330 Installation Reference To configure a T1/E1/PRI port on the gateway, type the following commands: # Configure a PRI T1 link to connect to PSTN switch. # Assuming the following: # • All numbers start with 408 (dest-pattern 408.%) are routed to PRI. # •...
AG 2330 Installation Reference destination-pattern 408.% port 1/1 # Send all digits forward-digits all no shutdown exit pots FXS Configuration To equip the FXS port of the gateway, several parameters need to be configured: The Port Location on the gateway ...
Need help?
Do you have a question about the SR 2330 and is the answer not in the manual?
Questions and answers