Avaya 2330 Manual page 142

Multiple Spanning Tree Protocol configuration
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To access the MSTP command context, enter:
4. To specify the maximum hops, enter:
Table 60: Variable definitions
<value>
Restoring the default maximum hops value
Use the procedure in this section to restore the default maximum hops value for a BPDU.
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To access the MSTP command context, enter:
4. To restore the default maximum hops value, enter:
Table 61: Variable definitions
<value>
142 Configuration — Layer 2 Ethernet
configure terminal
bridge
mstp
max-hops <value>
Variable
configure terminal
bridge
mstp
no max-hops <value>
Variable
Comments? infodev@avaya.com
Value
The maximum hops for which a BPDU is
valid. Valid values are 1 to 40. The default
value is 20.
Value
Specifies the maximum hop value that is
currently configured. Valid values are 1 to 40.
The default value is 20.
July 2013