Avaya 2330 Manual page 160

Multiple Spanning Tree Protocol configuration
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To access the MSTP command context, enter:
4. To select an MSTP instance, enter:
5. To configure the priority for the instance, enter:
Table 83: Variable definitions
<instance id>
<value>
Restoring the default priority for an instance
Use the procedure in this section to restore the default priority value for an instance.
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To access the MSTP command context, enter:
4. To select an MSTP instance, enter:
5. To restore the default priority for the instance, enter:
160 Configuration — Layer 2 Ethernet
configure terminal
bridge
mstp
instance <instance id>
priority <value>
Variable
configure terminal
bridge
mstp
instance <instance id>
Comments? infodev@avaya.com
Value
Specifies the MSTP instance ID. Valid values
are 0 to 15.
Specifies the priority that you assign to the
instance. The default value for priority is
32768. Bridge priority values are in
increments of 4096. Valid values are 0 to
61440.
July 2013