Electrical.connection - Technogym BIKE EXC 700 LED Manual

10 Electrical connection
Before.connecting.the.equipment.to.the.mains.power.supply,.ensure.that.the.electrical.
system.specifications.comply.to.binding.regulations..Check.the.mains.power.supply.
specifications.on.the.label.applied.to.the.frame.under.the.control.panel.
D
anger
The wall socket must be located in a place where the plugging and
unplugging can be done easily and safely.
When plugging in, the switch on the equipment must be in the 0 position
(i.e. the equipment must be switched off).
Plug. the. power. cable. first. into. the. equipment. socket. and. then. into. the. wall.
socket.
W
arning
Check the state of the power supply cable periodically.
D
anger
The power supply socket must be grounded
connection must be installed by a qualified electrician before connecting
the equipment to the electricity mains.
10 e
leCtrICal ConneCtIon
. If not, a ground
21