Eaton-Williams Cooling Distribution Unit Features; Cooling Distribution Unit Supplier Information For Customers In Europe; Eaton-Williams Cooling Distribution Unit Specifications - IBM XIV Gen3 Series Planning Manual

Note: Customers in other locations can contact Eaton-Williams Group or Vette
Corporation (see Table 40 on page 89).
The following illustration shows the Eaton-Williams cooling distribution unit
features.
Pump isolation valves
Figure 32. Eaton-Williams cooling distribution unit features
The cooling distribution unit specifications are described in the following table.
90
IBM XIV Gen3 281x-11x, 281x-21x, and 281x-314 Planning Guide
Table 41. Cooling distribution unit supplier information for customers in Europe
Supplier Cooling distribution units
Eaton-Williams
v CDU120 (120 kW, 400 - 480V)
Group, Ltd (UK)
v CDU121 (120 kW, 208 V)
v CDU150 (150 kW, 400 - 480V)
v CDU151 (150 kW, 208 V)
Plate heat exchanger
Reservoir tank
Primary flow meter
Level switch
Table 42. Eaton-Williams cooling distribution unit specifications
Performance
Maximum cooling capacity
Contact information
Website:
Eaton-Williams
(www.eaton-williams.com/)
Phone:
(0) 1732 866055
Fax:
(0) 1732 867937
Address:
Eaton-Williams Group Ltd.
Station Road
Edenbridge
Kent
TN8 6EZ
Control panel
Control display
(user interface)
Primary control valves
(run and standby)
Pump transit bracket
(remove after installation)
Secondary pumps
(run and standby)
Lockable castor and
adjustable plinth
Properties
120 kW (409 450 Btu/hr) or 150 kW (511 815
Btu/hr)