Creating A New Mix Pass - Solid State Logic AWS DELTA 916 Owner's Manual

Creating A New Mix Pass

To create a new automated Mix Pass, enter the List Mix menu (shown below) and use the left-hand encoder to highlight
the New Mix entry.
Now press the encoder switch or the Select soft key to select the New Mix Setup page.
Press Protect to access
the protection options
Press Execute to continue
All the channel faders will enter Absolute mode, as indicated by a red LED next to each fader. Depending on the Show
channel names option selected in the SSL / Misc / Setup menu (see Automation Setup Options), the current
automation status for each fader may be displayed in the scribble strip above the fader, replacing the standard scribble
label.
Pressing the CANCEL button twice quickly will return you to the List Mix page.
Select Protect to disconnect controls from the automation system - see Page 7-10 for more details.
AWS elta Operator's Manual
Automation
Page 7-19