Solid State Logic AWS DELTA 916 Owner's Manual page 54

AWS 948 Tutorial
B T
ASIC RACKING
For basic tracking, channels can be a mixture of stereo and mono. The signal processing, cue and FX sends are available
within both channel configurations. Sends to the DAW can be sourced either from the Channel Outputs or from the Track
Busses, and the stereo master return from the DAW might be brought back into the console via either the External inputs
or a stereo channel. The EFX system can be employed to provide independent level to the DAW send. Mono-configured
channels use In-Line Mix with the secondary channel path left inactive.
Below are examples of how mono and stereo channels might be configured in basic mode. The stereo master return from
the DAW may be brought back into the console using an EXT B input (as shown for the mono configuration) or a spare
stereo channel (as shown for the stereo configuration). The monitors can be fed by a sum of the mix bus and the DAW
return (as shown for the mono configuration) or by just the DAW (as shown for the stereo configuration).
EFX is described in Section 3.
M C
ONO ONFIGURATION
Channel 1 Input:
Mic In or Line In Left
S C
TEREO ONFIGURATION
Chan 1
Input:
Line In
Left &
Line In
Right
Page 2b-4
C
ONFIGURATION
Signal
Processing
Channel Path A
CUE Sends
Foldback
Channel Path A
Signal
Processing
Channel Path B
Foldback
Channel
Output 1L
Mix Bus
CUE
Sends
Mix Bus
Monitoring
Ext B
Channel Out
1L &1R
Monitoring
Ext B
AWS elta Owner's Manual
DAW
DAW